Diecut Solutions http://diecutsolutions.com Tue, 10 Apr 2012 21:00:25 +0000 en hourly 1 http://wordpress.org/?v=3.3.1 Die Cut Solutions is Fabricating Foam and Rubber Gaskets with or without Adhesive. http://diecutsolutions.com/2012/04/die-cut-solutions-is-fabricating-foam-and-rubber-gaskets-with-or-without-adhesive/?utm_source=rss&utm_medium=rss&utm_campaign=die-cut-solutions-is-fabricating-foam-and-rubber-gaskets-with-or-without-adhesive http://diecutsolutions.com/2012/04/die-cut-solutions-is-fabricating-foam-and-rubber-gaskets-with-or-without-adhesive/#comments Tue, 10 Apr 2012 20:56:25 +0000 admin http://diecutsolutions.com/?p=334

Die Cutting Solutions is a global leader in providing precision die-cut component parts for customers in the electronics, automotive, and medical industries for around the world,

FOAM AND ADHESIVE

FOAM AND ADHESIVE

 

 

 

 

 

 

Die Cutting Solutions engineers partner closely with customers to solve complex manufacturing and assembly problems. We strive to provide customers with quality products and exceptional service at competitive prices.

 

Solid Rubber

Elastomer materials exhibit a wide range of properties achieved by variations in composition formulas. Proper product selection is critical in most applications.

Sponge and Foam

Sponge and foam exhibit different mechanical and physical properties. Each is available in several densities, as well as polymer variations and chemical compositions.

Plastics

Die Cutting Solutions fabricates most major categories of plastic films and sheets, including polyester polycarbonate, vinyl, polyethylene, polypropylene, polystyrene, Teflon®and others. Applications include faceplates, insulators, lenses and shims.

Vulcanized Fibers

Commercial grades of vulcanized fibers are strong, lightweight, tear-resistant materials suitable for a wide variety of electrical and mechanical applications.

Composition Cork/Cork Rubber

Composition cork is lightweight and stable exhibiting compressibility and moisture resistance, while cork rubber is cork bonded to polymeric rubbers and exhibits good oil, fuel, and heat resistance.

 


]]> http://diecutsolutions.com/2012/04/die-cut-solutions-is-fabricating-foam-and-rubber-gaskets-with-or-without-adhesive/feed/ 0 Die Cuting Solutions Inc Is Fabricating The Bergquist Company Product lines, Thermal Interface Material. Sil Pad, Gap Pad, Thermally Conductive Adhesives. http://diecutsolutions.com/2012/02/die-cuting-solutions-inc-fabricating-the-bergquist-company-product-lines-thermal-interface-material-sil-pad-gap-pad-thermally-conductive-adhesives/?utm_source=rss&utm_medium=rss&utm_campaign=die-cuting-solutions-inc-fabricating-the-bergquist-company-product-lines-thermal-interface-material-sil-pad-gap-pad-thermally-conductive-adhesives http://diecutsolutions.com/2012/02/die-cuting-solutions-inc-fabricating-the-bergquist-company-product-lines-thermal-interface-material-sil-pad-gap-pad-thermally-conductive-adhesives/#comments Mon, 27 Feb 2012 01:13:38 +0000 admin http://diecutsolutions.com/?p=320

Is  now  fabricating Bergquist Thermal Interface Material. Sil Pad, Gap Pad, Thermally Conductive Adhesives.

 Please contact us for a quotation today! 

Die Cut Sil Pad Thermal Material

 
 
 
 
 
 
 
 
 
 
 
The Bergquist Company is a global supplier of thermal interface material with the best-known brands in the business. We have the right thermal management products, touch screen technology, phase change material, and heat seal products for your electronic application.

]]> http://diecutsolutions.com/2012/02/die-cuting-solutions-inc-fabricating-the-bergquist-company-product-lines-thermal-interface-material-sil-pad-gap-pad-thermally-conductive-adhesives/feed/ 0 Die Cutting Solutions now selling UL Approved Kapton Tape 1 mil, 2 mil, 5 mil, Silicone and Acrylic Adhesive http://diecutsolutions.com/2011/12/die-cutting-solutions-now-selling-kapton-tape-1-mil-2-mil-5-mil-silicone-and-acrylic-adhesive/?utm_source=rss&utm_medium=rss&utm_campaign=die-cutting-solutions-now-selling-kapton-tape-1-mil-2-mil-5-mil-silicone-and-acrylic-adhesive http://diecutsolutions.com/2011/12/die-cutting-solutions-now-selling-kapton-tape-1-mil-2-mil-5-mil-silicone-and-acrylic-adhesive/#comments Fri, 16 Dec 2011 20:22:50 +0000 admin http://diecutsolutions.com/?p=305

Kapton Silicone Tape 1 Mil x 36yd Rolls.

Kapton Silicone Tape

 
 

Kapton Tapes, 1 Mil, RoHS Compliant
Technical Datasheet

Kapton Tapes are made from DuPont Kapton™ HN general purpose film with silicon adhesive. They have been used in applications at temperatures as low as -269°C (-452°F) and as high as 400°C (752°F). DuPont™ Kapton® polyimide films have set the industry standard for over 45 years in high performance, reliability and durability, with a unique combination of electrical, thermal, chemical and mechanical properties that withstand extreme temperature, vibration and other demanding environments. Kapton® polyimide films make innovative design solutions possible in a range of industries including consumer electronics, solar photo voltaic and wind energy, aerospace, automotive and industrial applications. Kapton Tapes have a high dielectric strength. Silicon adhesive protection leaves no residue. They conform to MIL-P-46112, TYPE I.
Kapton® is a registered trademark of DuPont


Applications:

Kapton Tape
Automotive sensor and manifolds
Insulating circuit boards
Etching
Fiber Optics Cable
High temperature powder coating
Semiconductor manufacturing
Wave soldering during circuit board assembly


]]> http://diecutsolutions.com/2011/12/die-cutting-solutions-now-selling-kapton-tape-1-mil-2-mil-5-mil-silicone-and-acrylic-adhesive/feed/ 1 Electronic UL Approved Polyester Yellow and Black Film Tapes, Now Available at Die Cutting Solutions Inc and on our On Line Store!! http://diecutsolutions.com/2011/12/electronic-ul-approved-polyester-film-tapes-now-available-at-die-cutting-solutions-inc-and-on-our-on-line-store/?utm_source=rss&utm_medium=rss&utm_campaign=electronic-ul-approved-polyester-film-tapes-now-available-at-die-cutting-solutions-inc-and-on-our-on-line-store http://diecutsolutions.com/2011/12/electronic-ul-approved-polyester-film-tapes-now-available-at-die-cutting-solutions-inc-and-on-our-on-line-store/#comments Thu, 08 Dec 2011 23:36:02 +0000 admin http://diecutsolutions.com/?p=302

Yellow or Black Polyester Film, Acrylic Adhesive, 130°C (B) rated, Total thickness .0025″ This tape has a high dielectric strength, great adhesive properties, outstanding heat and solvent resistance, and high tensile strength. Ideal for the construction and insulation of coils, transformers, and various electronic components. Cost effective alternative to 3M-56 3M-1290 or 1350 and Permacel P256 P286 or 3161.

Other Sizes Available upon request.

Please see our Store or E mail us for a quotation.


]]> http://diecutsolutions.com/2011/12/electronic-ul-approved-polyester-film-tapes-now-available-at-die-cutting-solutions-inc-and-on-our-on-line-store/feed/ 0 DCS is now selling Pressure Sensitive Transfer Adhesives Tape (PSA) including Double coated and Single Coated adhesives http://diecutsolutions.com/2011/12/dcs-is-now-selling-pressure-sensitive-adhesives-psa-including-double-coated-and-single-coated-adhesives/?utm_source=rss&utm_medium=rss&utm_campaign=dcs-is-now-selling-pressure-sensitive-adhesives-psa-including-double-coated-and-single-coated-adhesives http://diecutsolutions.com/2011/12/dcs-is-now-selling-pressure-sensitive-adhesives-psa-including-double-coated-and-single-coated-adhesives/#comments Tue, 06 Dec 2011 00:14:55 +0000 admin http://diecutsolutions.com/?p=267

DCS is now selling Pressure sensitive adhesives tape (PSA) including Double coated and Single Coated adhesives, transfer adhesives, Great For Hobbies, Crafts, General Household Repairs, Acid Free to not hurt any of your precious photos! Exceptional alternatives to the 3M-#467, 3M-#468, 3M-#950 at the fraction of the cost.

Please see our Store or E mail us


]]> http://diecutsolutions.com/2011/12/dcs-is-now-selling-pressure-sensitive-adhesives-psa-including-double-coated-and-single-coated-adhesives/feed/ 0 Watch for Die Cut Solutions New Products http://diecutsolutions.com/2011/12/watch-for-die-cut-solutions-new-products/?utm_source=rss&utm_medium=rss&utm_campaign=watch-for-die-cut-solutions-new-products http://diecutsolutions.com/2011/12/watch-for-die-cut-solutions-new-products/#comments Mon, 05 Dec 2011 23:59:26 +0000 admin http://diecutsolutions.com/?p=264

As we expand out online store we have over 20 new products to launch for 2012.

"Steel Rule Tool Special Cavity Cut"

We can build tooling to handle all kinds of special die cutting requirements.


]]> http://diecutsolutions.com/2011/12/watch-for-die-cut-solutions-new-products/feed/ 0